Authorized Lite-Form Nationwide Distributor & Fabricator

Long Pine, Nebraska      Toll-Free 1-800-568-6145      email liteform@sscg.net

 

HOME

 

Installation Instructions

Lite-Form

Tech Specs

 

Lite-Form®

Concrete Building Systems

A "Higher Standard" in Construction

 

Authorized Nationwide Distributor & Fabricator

 

Look no farther for the best high efficiency concrete building systems.....

Designed to Perform…..

Beautiful Home Built to Last

 

LiteForm solid concrete walls and foundations are poured into "stay-in-place" insulated concrete forms.  Obviously, they retain heat or cooling far better than hollow, bare concrete blocks,  Heat loss of a LITE-FORM insulated concrete wall is R30+.  An ordinary concrete block wall is only R2.5 ! And with no joints, LITE-FORM offers superior resistance to water penetration. The walls are solid--almost twice as dense as concrete, offering superior resistance to cave-ins and buckling. Setting up the Building Forms

 

 

 

 

 

 

Setting up the Forms Below- and Above-Ground Construction

LiteForm used in a basement application

Lite-Form, Fold Form, and Lite-Deck  is the total building system for Residential and Commercial use and can be used in above- and  below-grade construction.

 

Energy-Efficient: The insulating value of high mass concrete walls combined with the superior performance of the extruded polystyrene insulation  is in excess of R-25.  Utility cost reductions of 20% and more are common when compared to framed homes. Strong: The solid concrete walls easily resist 100+ mph winds and are often used in high risk regions, for "safe room and "safe home" projects.  Form walls are up to 8 times stronger than typical wood frame construction.
Quiet: Fold-Form® solid concrete walls provide a superior barrier to sound pollution.  They are preferred for areas with high noise levels and can reduce sound penetration by 50% Fire Resistant: Home owners often enjoy lower insurance rates due to the permanent protection of solid concrete.
Fast:  Hand tools and common hardware are all that's need for most projects.  Versatile: Concrete walls up to 36-inches thick are available.  Lite-Form structures meet all current world-wide standards for concrete construction.

Lite-Form concrete walls can be used for nearly all residential or commercial floor plans without making and major design changes.
Anchoring drywall EIFS or Stucco Finish Scaffold/Brace
Anchoring Drywall

 

Stucco Finish Scaffold/Brace
Vertical In-Wall Bracing Traditional Siding Waterproof Finish
Vertical In-Wall Bracing

 

Traditional Siding Waterproof Finish
45-degree Corner Tie Anchoring drywall Brick Veneer
45-degree Tie Anchoring Drywall

 

Brick Veneer
Low Cost Disposable Form Vertical In-Wall Bracing  
Low Cost Disposable Form Vertical In-Wall Bracing

 

 

Typical Wall Set-Up and Bracing

For more information on LiteForm, email liteform@sscg.net

Contact Info

Questions? call or email us

800-568-6145

liteform@sscg.net

To get more information Click Here.